Douglas - Champion Pot and Pan high temp dishwasher -20 PAN

Made in the USA

Great for pans and large pots

7.5 hp powerful Booster heater

3 Phase/480V/38 Amps 

Can be wired for 208 volt

Height: 93.00 in Width: 46.00 in Length: 62.00 in

Weight:1200.00 lbs

New price is $52,650.00

The SD-20 is a split door, front loading, batch washer that is designed to wash and sanitize various containers commonly found in the bakery, food processing, nutraceutical, and distribution industries. It is also suitable for many industrial applications.

The machine features two stainless steel tanks that can be heated with electric, gas or steam booster heaters. One tank is used to recirculate detergent wash water and the other is for dispensing sanitizing rinse water.

Wash times are pre-programmed at 4, 6 or 8 minutes. Regardless of the wash cycle selected, each is followed by a 30 second sanitizing rinse and a 60 second steam exhaust cycle.

Using the shortest wash time, the machine can process up to 10 batches an hour. At this maximum rate of operation, the SD-20 will use just 56 gallons of water per hour.

Standard and custom wash racks are available to process several types of containers. While capacities vary depending on size and configuration, sheet pan capacity is 20 per batch.

Like all Douglas Washers, the SD-20 will help you meet today’s high standards for cleanliness and sanitation while saving you time, labor, water, and energy.

ELECTRICAL

480 Volt - 3 Phase, 40 Running Amps, 50 Amp Minimum Service Breaker

DOOR

Stainless steel split door design. The top half rises while the lower half folds down to provide a space saving drain table.

SPRAY ARM ASSEMBLY

Stainless steel spray arm assemblies, with stainless steel jets and quick-release mechanism for easy cleaning and reassembly.

FILTER

Perforated, removable, stainless steel baskets.

WATER PUMP

7½ H.P., 480 volt with output of 120 gallons per minute at 35 to 45 P.S.I.

DIGITAL CONTROL & INFORMATION CENTER

Push pad operation of “power on”, “stop” and “short, medium, or long wash cycles”. A digital display indicates “time remaining” for each cycle. LED’s indicate wash, rinse, and unload functions. Pre-programmed circuit board allows the push pad to be used as a “diagnostic center” by displaying “error codes” for ease of troubleshooting.

GAUGES

Special moisture-resistant design, measures wash temperature, wash pressure, and rinse temperatures.

WASH TANK

Stainless steel with electric, infrared gas, live steam or steam coil heating, thermostatically controlled, low-water protected, sloped to drain with a 36-gallon capacity

RINSE TANK

Stainless steel with electric immersion heater. Uses 5.6 gallons per 30-second cycle.

WASH RACKS

Stainless steel rod, built to match specific washing requirements. Usable area 26½” D x 39” W x 26½” H.